Skip to main content

Angular Directive Anatomy

Angular directive reference

Scope: Page vs Component vs Template relationship



Scope : Component


Disclaimer: From write perceptive and understanding only.

Comments

Post a Comment

Popular posts from this blog

Flash Tool Error Codes -MTK Chipset

Complete List of SP Flash Tool Error Codes and their Meanings and Solutions MTK Chipset. . How to Fix SP Flash Tool Errors (BROM Error Codes): SP Flash Tool Failed to enumerate COM Port This error clearly means that the Flash Tool has issues finding the COM port on which your device is connected. Solution: Connect your watch to other Port and make sure you have USB Drivers installed. Open “Device Manager” and find the COM Port of the device you connected. Once found, open Flash Tool, click on Options -> COM Port -> Select the COM Port on which you have connected your device. Device automatically disconnects during flashing Meaning: Device disconnects as soon as the flashing process begins, interrupting the process. Solution: Try a different USB Cord, USB Port & PC Hold the Volume down or up button while connecting the device to PC for flashing SP Flash Tool remains at 0% Solution: Install necessary MediaTek VCOM drivers on PC. Use the latest version of S...
Post a Comment
Selanjutnya »

Fiberglass DIY

Method Mix Fiberglass Substance Weigh a certain amount of resin, then add cobalt water according to 0.8% -1% of the resin amount, and stir evenly (  packing under 3 kg, the accelerator has been added, skip this step  ) Add the curing agent again at 2% -2.5% of the resin volume, and stir evenly. The fixing speed of this series of products is closely related to the ambient temperature and humidity. According to the temperature, adjust the proportion of curing agent and cobalt water appropriately. Reference data, add at room temperature 25 ℃, gel time about 9-15 minutes.  The curing time is 20-30 minutes, the above ratio is for reference only, the actual operation is subject to the site requirements. Proportion 100ml: (0.8-1)ml <----->100ml: (2-2.5)ml Resin: accelerator  <----->  Resin: curing agent Method of Repairing FRP: Grind the glass fiber reinforced plastic surface to be repaired with sandpaper first. Brush the tuned resin ...
Post a Comment
Selanjutnya »